In the store, all TVs are shown differently, and the buyer, as a rule, chooses the brightest TV. But he should not just show pictures, but introduce as little distortion as possible into the image. You will be prompted to make the correct settings when you buy a TV in a store, but you will have to pay for it. LG TVs are equipped with Smart TV technology, so the user can set up a “smart TV” on his own and for free.
Connect the power cord of the TV to the mains. Connect antenna or cable. Turn on the TV using the "Input" button on the remote control, aiming it at the screen. The TV comes with two remote controls: normal and Magic remote, in addition, you can connect a computer USB mouse. The easiest way to control your TV is with the Magic Remote. It looks like a mouse, but works in space, not on a surface. Settings management is simple, intuitive. The operating manual is available in electronic form on the TV screen. If the TV is turned on for the first time, the factory settings screen will be displayed. With partial or full TV set-up, the broadcast of the last active channel will be turned on. To turn on the TV mode, you can press the "TV" button. Access to factory settings opens the "Options" item of the main menu.
Follow the instructions on the screen to select your TV settings according to your preference. Where necessary, click "OK". Specify the display language, "Home View" - as the setting for the best view mode, select the country of residence. The item "Autosearch" allows you to automatically scan the channels and save the available programs.
To automatically configure programs, press the "Menu" button - the main menu will open. Use the navigation buttons to navigate to Setup. Select "Run" to start automatic tuning. Scanning and saving of available programs will start. When scanning is complete, press "Exit" or return to the previous menu - "Back".
To select "Antenna" in the settings, click in the main menu "Settings" - "Autosearch" - "Antenna". To start automatic configuration, select "Run", then end - "Exit". The "Cable" mode differs in that in the "Settings" - "Autosearch" menu, select "Cable" and then "Other operators". Use the navigation buttons to select Default, Full, or User. Make appropriate adjustments using numbers or navigation buttons (except in "Full" mode). Then - "Close" - "Execute", scanning and saving of channels will begin, upon completion of the process - "Exit".
When you select Cable mode, the selection of your cable service provider may differ from country to country depending on network conditions. It takes some time to search and tune channels, some channels may be missing. Follow the steps: "Settings" - "Autosearch" - "Cable" and enter additional values: frequency, speed. characters, network ID. For all of these parameters, contact your cable TV service provider. You can manually replenish the list of channels using the “Manual tuning” - “DTV” mode - go to the number of the required channel, add programs.
Adjust additional parameters as needed. Setting the aspect ratio is done using the "Ratio" menu, as well as using the quick and main menu. To achieve the best result, select the mode: "16: 9" - filling the screen horizontally, "Original" - the image in the best quality without loss, "Normal", "Full screen" and others.
Adjust the screen if you don't like the factory settings. To change the picture mode, for its optimal setting, enter the main menu and select the "Picture mode" item in the "Picture" item. Use the navigation buttons to select one of the modes: Vivid, Standard, Cinema, etc. For the selected mode, select the parameters for the best image quality: "Brightness", "Backlight", "Contrast". In RGB mode, adjust the parameters for outputting images from the computer: main menu, "Display".
Adjust the sound quality. To do this, select "Sound" - "Sound Mode" in the main menu. Set the desired sound quality using the modes: "Standard", "Music", "Cinema", "Sports", "Game". For the selected sound mode, set the desired parameters: Treble, Bass, Surround X. The Reset function returns the settings to the factory defaults.
A modern TV set may well replace a computer. It can be connected to the Internet via Wi-Fi, connected to a computer, used as a monitor, watching movies in various formats from external media, watching movies in 3D using the supplied set of stereo glasses, watching movies in digital quality (HD).
Loading ...